nday
CVE-2025-40003

net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work

Linux / Linux

Disclosed . nday has no fix record for it yet; that does not mean no patch exists. None of the four PoC sources lists it. Not in CISA KEV.

tags productLinux kernel product typeoperating system
why these tags

nday derives these tags by fixed rules from the facts below; NVD, the CNA and other sources do not assign them. Vocabulary and rules: ~/tags.

Linux kernel
affected products in the CVE record: Linux · Linux
operating system
affected products in the CVE record: Linux · Linuxthe product type of Linux kernel in nday's product registry
stage
DIS
disclosed
cvss
no score yet

Lifecycle

x axis UTC; dot = exact minute, wide bar = date only, hollow = unknown or inferred.
time unknown
DISdisclosed
2025-10-18T08:03Z
PATpatch
no record yet
ANAanalysis
no record yet
POCPoC
no record yet
ITWexploited
no record yet
KEVKEV
no record yet

Summary

In the Linux kernel, the following vulnerability has been resolved:

net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work

The origin code calls cancel_delayed_work() in ocelot_stats_deinit() to cancel the cyclic delayed work item ocelot->stats_work. However, cancel_delayed_work() may fail to cancel the work item if it is already executing. While destroy_workqueue() does wait for all pending work items in the work queue to complete before destroying the work queue, it cannot prevent the delayed work item from being rescheduled within the ocelot_check_stats_work() function. This limitation exists because the delayed work item is only enqueued into the work queue after its timer expires. Before the timer expiration, destroy_workqueue() has no visibility of this pending work item. Once the work queue appears empty, destroy_workqueue() proceeds with destruction. When the timer eventually expires, the delayed work item gets queued again, leading to the following warning:

workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats

WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0
...
RIP: 0010:__queue_work+0x875/0xaf0

... RSP: 0018:ffff88806d108b10 EFLAGS: 00010086

RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88
RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2
R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000
R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0
FS:  0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0
Call Trace:
 <IRQ>
 ? kasan_report+0xc6/0xf0
 ? __pfx_delayed_work_timer_fn+0x10/0x10
 ? __pfx_delayed_work_timer_fn+0x10/0x10
 call_timer_fn+0x25/0x1c0
 __run_timer_base.part.0+0x3be/0x8c0
 ? __pfx_delayed_work_timer_fn+0x10/0x10
 ? rcu_sched_clock_irq+0xb06/0x27d0
 ? __pfx___run_timer_base.part.0+0x10/0x10
 ? try_to_wake_up+0xb15/0x1960
 ? _raw_spin_lock_irq+0x80/0xe0
 ? __pfx__raw_spin_lock_irq+0x10/0x10
 tmigr_handle_remote_up+0x603/0x7e0
 ? __pfx_tmigr_handle_remote_up+0x10/0x10
 ? sched_balance_trigger+0x1c0/0x9f0
 ? sched_tick+0x221/0x5a0
 ? _raw_spin_lock_irq+0x80/0xe0
 ? __pfx__raw_spin_lock_irq+0x10/0x10
 ? tick_nohz_handler+0x339/0x440
 ? __pfx_tmigr_handle_remote_up+0x10/0x10
 __walk_groups.isra.0+0x42/0x150
 tmigr_handle_remote+0x1f4/0x2e0
 ? __pfx_tmigr_handle_remote+0x10/0x10
 ? ktime_get+0x60/0x140
 ? lapic_next_event+0x11/0x20
 ? clockevents_program_event+0x1d4/0x2a0
 ? hrtimer_interrupt+0x322/0x780
 handle_softirqs+0x16a/0x550
 irq_exit_rcu+0xaf/0xe0
 sysvec_apic_timer_interrupt+0x70/0x80
 </IRQ>

...

The following diagram reveals the cause of the above warning:

CPU 0 (remove)             | CPU 1 (delayed work callback)
mscc_ocelot_remove()       |
  ocelot_deinit()          | ocelot_check_stats_work()
    ocelot_stats_deinit()  |
      cancel_delayed_work()|   ...
                           |   queue_delayed_work()
      destroy_workqueue()  | (wait a time)
                           | __queue_work() //UAF

The above scenario actually constitutes a UAF vulnerability.

The ocelot_stats_deinit() is only invoked when initialization failure or resource destruction, so we must ensure that any delayed work items cannot be rescheduled.

Replace cancel_delayed_work() with disable_delayed_work_sync() to guarantee proper cancellation of the delayed work item and ensure completion of any currently executing work before the workqueue is deallocated.

A deadlock concern was considered: ocelot_stats_deinit() is called in a process context and is not holding any locks that the delayed work item might also need. Therefore, the use of the _sync() variant is safe here.

This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated ocelot-swit ---truncated---

Original text of the CVE record (cvelist), shown as published.

Event log

+DISdisclosed

CVE record published by Linux.

src cvelist · nday , bulk import · raw
{
  "id": 375475,
  "type": "disclosed",
  "source": "cvelist",
  "url": "https://www.cve.org/CVERecord?id=CVE-2025-40003",
  "occurred_at": "2025-10-18T08:03:23.529Z",
  "observed_at": "2026-11-13T05:39:08.090137Z",
  "is_backfill": true,
  "dedupe_key": "",
  "detail": {
    "state": "PUBLISHED",
    "date_published": "2025-10-18T08:03:23.529Z",
    "assigner_short_name": "Linux"
  }
}

Report an error

report an error or omission

Something on this page wrong or missing? Tell the editors; if they accept it, this page's revision log says so publicly. Upstream data is not changed.

Researcher discussion

0 researchers mentioned this in the last 7 days

Posts on X by researchers on nday's list that mention this CVE, shown as posted. nday does not check them.

nday has not collected any post on X by listed researchers that mentions this CVE.

Discussion

0 comments

No comments yet.