nday
CVE-2026-98396

powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare()

Linux / Linux

CVE 공개: . nday가 아직 패치 근거를 수집하지 않았습니다. 패치가 없다는 뜻은 아닙니다. PoC 출처 4곳 모두 미등재. CISA KEV 미등재.

tags productLinux kernel product typeoperating system
why these tags

nday derives these tags by fixed rules from the facts below; NVD, the CNA and other sources do not assign them. Vocabulary and rules: ~/tags.

Linux kernel
affected products in the CVE record: Linux · Linux
operating system
affected products in the CVE record: Linux · Linuxthe product type of Linux kernel in nday's product registry
현재 단계
DIS
공개
CVSS
점수 없음

생명주기

가로축 UTC. 점 = 분 단위, 넓은 막대 = 날짜만, 빈 표시 = 불명 또는 추정.
시점 알 수 없음
DIS공개
10-14T13:25Z
PAT패치
아직 기록 없음
ANA분석
아직 기록 없음
POCPoC
아직 기록 없음
ITW악용
아직 기록 없음
KEVKEV
아직 기록 없음

요약

In the Linux kernel, the following vulnerability has been resolved:

powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare()

KUAP means kernel cannot touch user memory unless it explicitly is enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning to userspace just before RFI, kernel should restore the user AMR value back.

Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare() as the last architecture step before returning to userspace. commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature") therefore called kuap_user_restore() from that hook. But on PowerPC that is too early. After irqentry_exit() / syscall_exit_to_user_mode() we still run platform specific exit routines.

e.g. code snippets showing both exception handling and system call handling as the callers of function arch_exit_to_user_mode_prepare() which does kuap_user_restore(). The below path shows that calling kuap_user_restore() is too early when called from arch_exit_to_user_mode_prepare().

Exception handling in exceptions-64s.S

=======================================

bl	CFUNC(do_page_fault)
	  ..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault)
	      arch_interrupt_async_enter_prepare(regs);
	      state = irqentry_enter(regs);
	      instrumentation_begin();
	      irq_enter_rcu();
	      handler(regs);
	      nap_adjust_return(regs);
	      irq_exit_rcu();
	      instrumentation_end();
	      arch_interrupt_async_exit_prepare(regs);
	      irqentry_exit(regs, state); 		   <<< too early
	        irqentry_exit_to_user_mode()
		  __exit_to_user_mode_prepare(regs, EXIT_TO_USER_MODE_WORK_IRQ);
		    arch_exit_to_user_mode_prepare(regs, ti_work);  <<< too early
b	interrupt_return_srr
		.. bl	CFUNC(interrupt_exit_user_prepare) <<< already calls kuap_user_restore

prep_irq_for_enabled_exit() retry can run kernel code with IRQs on. So only when that routine is fully finished is when the user KUAP should be fully restored which interrupt_exit_user_prepare() already takes care of before returning.

Similarly for system call handling in interrupt_64.S

======================================================

	bl	CFUNC(system_call_exception)

.Lsyscall_exit:

	addi	r4,r1,STACK_INT_FRAME_REGS
	li	r5,0 /* !scv */
	bl	CFUNC(syscall_exit_prepare)
		  .. kuap_assert_locked();
		     syscall_exit_to_user_mode(regs); <<< too early
		       syscall_exit_to_user_mode_prepare(regs);  <<< too early
 		     kuap_user_restore(regs);         <<< already calls

syscall_exit_prepare(), which can enable IRQs, replay a pending interrupt, and only then rfi. Those functions already restore KUAP immediately before rfi.

Note that if we restore the user AMR too early like in the current code as shown from the code snippets above, then we get the following warning when CONFIG_PPC_KUAP_DEBUG is enabled:

WARNING: arch/powerpc/include/asm/book3s/64/kup.h:293 at interrupt_exit_user_prepare+0x1a0/0x1c0
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected)
TRAP: 0700
LR: c00000000000d8d4 CTR: c0000000021fe500
MSR: <SF,EE,ME,IR,DR,RI,LE>  CR: 44000804  XER: 20040000
interrupt_exit_user_prepare+0x1a0/0x1c0
interrupt_return_srr_user+0x8/0x12c

Original text of the CVE record (cvelist), shown as published.

이벤트 로그

+DISCVE 공개

CVE 레코드 공개(CNA: Linux).

출처 cvelist · nday 일괄 수집 · 원본
{
  "id": 457692,
  "type": "disclosed",
  "source": "cvelist",
  "url": "https://www.cve.org/CVERecord?id=CVE-2026-98396",
  "occurred_at": "2026-10-14T13:25:58.49Z",
  "observed_at": "2026-11-13T05:40:20.493151Z",
  "is_backfill": true,
  "dedupe_key": "",
  "detail": {
    "state": "PUBLISHED",
    "date_published": "2026-10-14T13:25:58.490Z",
    "assigner_short_name": "Linux"
  }
}

Report an error

report an error or omission

Something on this page wrong or missing? Tell the editors; if they accept it, this page's revision log says so publicly. Upstream data is not changed.

연구자 논의

최근 7일간 연구자 0명이 언급

목록의 연구자가 X에서 이 CVE를 언급한 게시물입니다. 원문 그대로 보여 주며 nday는 검증하지 않습니다.

명단의 연구자가 X에서 이 CVE를 언급한 게시물은 아직 수집되지 않았습니다.

Discussion

0 comments

No comments yet.