nday
CVE-2024-56589

scsi: hisi_sas: Add cond_resched() for no forced preemption model

Linux / Linux

CVE 공개: . nday가 아직 패치 근거를 수집하지 않았습니다. 패치가 없다는 뜻은 아닙니다. PoC 출처 4곳 모두 미등재. CISA KEV 미등재.

why these tags

nday derives these tags by fixed rules from the facts below; NVD, the CNA and other sources do not assign them. Vocabulary and rules: ~/tags.

local
AV:L in CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H (CVSS 3.1) from NVD's analysts
no user interaction
UI:N in CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H (CVSS 3.1) from NVD's analysts
Linux kernel
affected products in the CVE record: Linux · LinuxCPE names NVD's analysts give as vulnerable: o:linux:linux_kernel
operating system
affected products in the CVE record: Linux · LinuxCPE names NVD's analysts give as vulnerable: o:linux:linux_kernelthe product type of Linux kernel in nday's product registry
현재 단계
DIS
공개
CVSS
점수 없음

생명주기

가로축 UTC. 점 = 분 단위, 넓은 막대 = 날짜만, 빈 표시 = 불명 또는 추정.
시점 알 수 없음
DIS공개
2024-12-27T14:50Z
PAT패치
아직 기록 없음
ANA분석
아직 기록 없음
POCPoC
아직 기록 없음
ITW악용
아직 기록 없음
KEVKEV
아직 기록 없음

요약

In the Linux kernel, the following vulnerability has been resolved:

scsi: hisi_sas: Add cond_resched() for no forced preemption model

For no forced preemption model kernel, in the scenario where the expander is connected to 12 high performance SAS SSDs, the following call trace may occur:

[  214.409199][  C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211]
[  214.568533][  C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[  214.575224][  C240] pc : fput_many+0x8c/0xdc
[  214.579480][  C240] lr : fput+0x1c/0xf0
[  214.583302][  C240] sp : ffff80002de2b900
[  214.587298][  C240] x29: ffff80002de2b900 x28: ffff1082aa412000
[  214.593291][  C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000
[  214.599284][  C240] x25: ffff1062bbac5c40 x24: 0000000000001000
[  214.605277][  C240] x23: 000000000000000a x22: 0000000000000001
[  214.611270][  C240] x21: 0000000000001000 x20: 0000000000000000
[  214.617262][  C240] x19: ffff3062a41ae580 x18: 0000000000010000
[  214.623255][  C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0
[  214.629248][  C240] x15: ffffffffffffffff x14: 0000000003ffffff
[  214.635241][  C240] x13: 000000000000ffff x12: 000000000000029c
[  214.641234][  C240] x11: 0000000000000006 x10: ffff80003a9f7fd0
[  214.647226][  C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001
[  214.653219][  C240] x7 : 0000000000000002 x6 : 0000000000000080
[  214.659212][  C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554
[  214.665205][  C240] x3 : 0000000000000002 x2 : 0000000000000020
[  214.671198][  C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8
[  214.677191][  C240] Call trace:
[  214.680320][  C240]  fput_many+0x8c/0xdc
[  214.684230][  C240]  fput+0x1c/0xf0
[  214.687707][  C240]  aio_complete_rw+0xd8/0x1fc
[  214.692225][  C240]  blkdev_bio_end_io+0x98/0x140
[  214.696917][  C240]  bio_endio+0x160/0x1bc
[  214.701001][  C240]  blk_update_request+0x1c8/0x3bc
[  214.705867][  C240]  scsi_end_request+0x3c/0x1f0
[  214.710471][  C240]  scsi_io_completion+0x7c/0x1a0
[  214.715249][  C240]  scsi_finish_command+0x104/0x140
[  214.720200][  C240]  scsi_softirq_done+0x90/0x180
[  214.724892][  C240]  blk_mq_complete_request+0x5c/0x70
[  214.730016][  C240]  scsi_mq_done+0x48/0xac
[  214.734194][  C240]  sas_scsi_task_done+0xbc/0x16c [libsas]
[  214.739758][  C240]  slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw]
[  214.746185][  C240]  cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw]
[  214.752179][  C240]  irq_thread_fn+0x34/0xa4
[  214.756435][  C240]  irq_thread+0xc4/0x130
[  214.760520][  C240]  kthread+0x108/0x13c
[  214.764430][  C240]  ret_from_fork+0x10/0x18

This is because in the hisi_sas driver, both the hardware interrupt handler and the interrupt thread are executed on the same CPU. In the performance test scenario, function irq_wait_for_interrupt() will always return 0 if lots of interrupts occurs and the CPU will be continuously consumed. As a result, the CPU cannot run the watchdog thread. When the watchdog time exceeds the specified time, call trace occurs.

To fix it, add cond_resched() to execute the watchdog thread.

Original text of the CVE record (cvelist), shown as published.

이벤트 로그

+DISCVE 공개

CVE 레코드 공개(CNA: Linux).

출처 cvelist · nday 일괄 수집 · 원본
{
  "id": 347738,
  "type": "disclosed",
  "source": "cvelist",
  "url": "https://www.cve.org/CVERecord?id=CVE-2024-56589",
  "occurred_at": "2024-12-27T14:50:56.983Z",
  "observed_at": "2026-11-13T05:38:45.966745Z",
  "is_backfill": true,
  "dedupe_key": "",
  "detail": {
    "state": "PUBLISHED",
    "date_published": "2024-12-27T14:50:56.983Z",
    "assigner_short_name": "Linux"
  }
}

Report an error

report an error or omission

Something on this page wrong or missing? Tell the editors; if they accept it, this page's revision log says so publicly. Upstream data is not changed.

연구자 논의

최근 7일간 연구자 0명이 언급

목록의 연구자가 X에서 이 CVE를 언급한 게시물입니다. 원문 그대로 보여 주며 nday는 검증하지 않습니다.

명단의 연구자가 X에서 이 CVE를 언급한 게시물은 아직 수집되지 않았습니다.

Discussion

0 comments

No comments yet.