nday
CVE-2022-50118

powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable

Linux / Linux

CVE 공개: . nday가 아직 패치 근거를 수집하지 않았습니다. 패치가 없다는 뜻은 아닙니다. PoC 출처 4곳 모두 미등재. CISA KEV 미등재.

tags weakness typeresource exhaustion accesslocalno user interaction productLinux kernel product typeoperating system
why these tags

nday derives these tags by fixed rules from the facts below; NVD, the CNA and other sources do not assign them. Vocabulary and rules: ~/tags.

resource exhaustion
CWE-674, stated by NVD's analysts
local
AV:L in CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H (CVSS 3.1) from NVD's analysts
no user interaction
UI:N in CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H (CVSS 3.1) from NVD's analysts
Linux kernel
affected products in the CVE record: Linux · LinuxCPE names NVD's analysts give as vulnerable: o:linux:linux_kernel
operating system
affected products in the CVE record: Linux · LinuxCPE names NVD's analysts give as vulnerable: o:linux:linux_kernelthe product type of Linux kernel in nday's product registry
현재 단계
DIS
공개
CVSS
점수 없음

생명주기

가로축 UTC. 점 = 분 단위, 넓은 막대 = 날짜만, 빈 표시 = 불명 또는 추정.
시점 알 수 없음
DIS공개
2025-06-18T11:02Z
PAT패치
아직 기록 없음
ANA분석
아직 기록 없음
POCPoC
아직 기록 없음
ITW악용
아직 기록 없음
KEVKEV
아직 기록 없음

요약

In the Linux kernel, the following vulnerability has been resolved:

powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable

commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") added a new function "pmi_irq_pending" in hw_irq.h. This function is to check if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is used in power_pmu_disable in a WARN_ON. The intention here is to provide a warning if there is PMI pending, but no counter is found overflown.

During some of the perf runs, below warning is hit:

WARNING: CPU: 36 PID: 0 at arch/powerpc/perf/core-book3s.c:1332 power_pmu_disable+0x25c/0x2c0
 Modules linked in:
 -----

 NIP [c000000000141c3c] power_pmu_disable+0x25c/0x2c0
 LR [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0
 Call Trace:
 [c000000baffcfb90] [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 (unreliable)
 [c000000baffcfc10] [c0000000003e2f8c] perf_pmu_disable+0x4c/0x60
 [c000000baffcfc30] [c0000000003e3344] group_sched_out.part.124+0x44/0x100
 [c000000baffcfc80] [c0000000003e353c] __perf_event_disable+0x13c/0x240
 [c000000baffcfcd0] [c0000000003dd334] event_function+0xc4/0x140
 [c000000baffcfd20] [c0000000003d855c] remote_function+0x7c/0xa0
 [c000000baffcfd50] [c00000000026c394] flush_smp_call_function_queue+0xd4/0x300
 [c000000baffcfde0] [c000000000065b24] smp_ipi_demux_relaxed+0xa4/0x100
 [c000000baffcfe20] [c0000000000cb2b0] xive_muxed_ipi_action+0x20/0x40
 [c000000baffcfe40] [c000000000207c3c] __handle_irq_event_percpu+0x8c/0x250
 [c000000baffcfee0] [c000000000207e2c] handle_irq_event_percpu+0x2c/0xa0
 [c000000baffcff10] [c000000000210a04] handle_percpu_irq+0x84/0xc0
 [c000000baffcff40] [c000000000205f14] generic_handle_irq+0x54/0x80
 [c000000baffcff60] [c000000000015740] __do_irq+0x90/0x1d0
 [c000000baffcff90] [c000000000016990] __do_IRQ+0xc0/0x140
 [c0000009732f3940] [c000000bafceaca8] 0xc000000bafceaca8
 [c0000009732f39d0] [c000000000016b78] do_IRQ+0x168/0x1c0
 [c0000009732f3a00] [c0000000000090c8] hardware_interrupt_common_virt+0x218/0x220

This means that there is no PMC overflown among the active events in the PMU, but there is a PMU pending in Paca. The function "any_pmc_overflown" checks the PMCs on active events in cpuhw->n_events. Code snippet:

<<>>

if (any_pmc_overflown(cpuhw))
 	clear_pmi_irq_pending();
 else
 	WARN_ON(pmi_irq_pending());

<<>>

Here the PMC overflown is not from active event. Example: When we do perf record, default cycles and instructions will be running on PMC6 and PMC5 respectively. It could happen that overflowed event is currently not active and pending PMI is for the inactive event. Debug logs from trace_printk:

<<>> any_pmc_overflown: idx is 5: pmc value is 0xd9a power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011 <<>>

Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011). When we handle PMI interrupt for such cases, if the PMC overflown is from inactive event, it will be ignored. Reference commit: commit bc09c219b2e6 ("powerpc/perf: Fix finding overflowed PMC in interrupt")

Patch addresses two changes: 1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); ) We were printing warning if no PMC is found overflown among active PMU events, but PMI pending in PACA. But this could happen in cases where PMC overflown is not in active PMC. An inactive event could have caused the overflow. Hence the warning is not needed. To know pending PMI is from an inactive event, we need to loop through all PMC's which will cause more SPR reads via mfspr and increase in context switch. Also in existing function: perf_event_interrupt, already we ignore PMI's overflown when it is from an inactive PMC.

2) Fix 2: optimization in clearing pending PMI. Currently we check for any active PMC overflown before clearing PMI pending in Paca. This is causing additional SP ---truncated---

Original text of the CVE record (cvelist), shown as published.

이벤트 로그

+DISCVE 공개

CVE 레코드 공개(CNA: Linux).

출처 cvelist · nday 일괄 수집 · 원본
{
  "id": 2135,
  "type": "disclosed",
  "source": "cvelist",
  "url": "https://www.cve.org/CVERecord?id=CVE-2022-50118",
  "occurred_at": "2025-06-18T11:02:48.672Z",
  "observed_at": "2026-11-12T14:10:31.286634Z",
  "is_backfill": true,
  "dedupe_key": "",
  "detail": {
    "ssvc": {
      "timestamp": "2026-11-05T19:54:48.638487Z",
      "automatable": "no",
      "exploitation": "none",
      "technical_impact": "partial"
    },
    "state": "PUBLISHED",
    "date_published": "2025-06-18T11:02:48.672Z",
    "assigner_short_name": "Linux"
  }
}

Report an error

report an error or omission

Something on this page wrong or missing? Tell the editors; if they accept it, this page's revision log says so publicly. Upstream data is not changed.

연구자 논의

최근 7일간 연구자 0명이 언급

목록의 연구자가 X에서 이 CVE를 언급한 게시물입니다. 원문 그대로 보여 주며 nday는 검증하지 않습니다.

명단의 연구자가 X에서 이 CVE를 언급한 게시물은 아직 수집되지 않았습니다.

Discussion

0 comments

No comments yet.